Motor Cleaner M1800 - 5 Litres
Bardahl Motor Cleaner M1800 is a biological degradable, non flammable powerful
cleaner which consists out of highly alkaline solvents and surface-active materials.
Bardahl Motor Cleaner is used for thorough cleaning of engines, chassis,
gearboxes and propeller shafts.
Bardahl Motor Cleaner can simply be sprayed in various concentrations on parts
which have to clean; a brush is needed with extreme polluted area’s. This highly
concentrated cleaner dissolves oil and grease, tar and dried anti-rust substances,
very rapidly and suitable for using on metal, and artificial and painted surfaces.
Applications
Dilution 1:3 For cleaning of engines, gear boxes, propeller shafts, axels etc.
Spray product on part and let it penetrate for 10 minutes. Clean
off with high pressure cleaner. If necessary dry clear with air.
Dilution 1:5 For removing of paraffin layers of new cars. Spray on body work
of car, let it penetrate for 10 minutes. When paraffin layer is
dissolved, spray off with high pressure cleaner, warm water is
advised.
Dilution 1:1 For removing oil. grease of floors. Spray the floor with cleaner
and divide with brush. Penetration time, about 15 minutes
afterwards clean off with water.
Dilution 1:10 To clean all polluted surfaces of trucks, vans, chassis and other
metal surfaces.
Bardahl Motor Cleaner is suitable for cleaning of all kinds of parts, tools and
working tools. It cleanes boats, motorcycles, caravans and also agricultural tools and
building machines. Bardahl Motor Cleaner is biological degradable, not flammable,
acid free and is environmental safe. PH value 12,6
Directions for use
Bardahl Motor Cleaner needs a few minutes to penetrate into the dirt layer. This
layer will than dissolve and become soft. After a period of 5-15 minutes it is
preferable to spray off the with Bardahl Motor Cleaner treated parts with a high
pressure cleaner and warm water. Bardahl Motor Cleaner is spray-able as a
concentrate or as a mixture with water.
Aluminium
Cleaning of aluminum has to be determined by the type of soiling and with
recognition of any special finishes which may have been used to the aluminum e.g.
Anodized aluminum is very sensitive to acids or alkalis and has to be treated with the
utmost care.
Bardahl Motor Cleaner can be used diluted with min. 2-3 parts water, left on the
surface for 2-5 minutes then rinsed off. Care must be taken to ensure the surface
does not dry out. Also please note if a warm/hot cleaning procedure is employed the
contact time must be reduced.
If in no doubt you must spot test an inconspicuous area first.
Finally if mechanical action e.g. brush wash rollers are involved the dilution of
Bardahl Motor Cleaner must be significantly reduced to say with 150-200 parts
water. Full rinsing must follow.
Biologically degradable
Bardahl Motor Cleaner is biologically degradable. The biological degradability,
measured according to the CEC L-33-T-82 test, is 90%.