SUPER GLUE PEN – SQUEEZE POINT
This handy Super Glue pen has unique press tabs for steady flow or drop-at-a-time application and is great when you’re looking for a precise application. Best used with non-porous application parts such as metal and rubber. The glue bonds instantly and sets in seconds.
Directions:
NOTE: For best results, surfaces should be clean & dry and parts should mate well.
1. Protect clothing and work surfaces (metal foil works well). Use in a well-ventilated area. Keep pen tip away from face and body. Follow directions on card for proper opening steps.
2. Apply to one surface, using 1 drop per square inch of surface. Do not spread glue with fingers – use applicator nozzle tip. Assemble parts and hold together with pressure for 15 seconds or until set.
3. Wipe tip if adhesive has accumulated before inserting pin in end of tube securely after use.
Works Best On:
- Aluminum
- Ceramic
- China
- Jewelry
- Metal
- Most Plastics
- Pottery
- Rubber
- Wood
Technical Specifications:
Not for use with Teflon, polyethylene, polypropylene, certain silicone rubber types, glass, rear view mirrors or parts that are subjected to great shock or continuous immersion in water. Not for porous materials such as paper, fabric or foam rubber.
Initial color: Clear, transparent
Final color: Clear
Set time: 10-30 seconds
Full Strength: 24 hours
Operating Temperature Range: -65 to 180°F (-54 to 82°C)
Storage: Replace outer cap and store upright in a cool area away from sunlight or
heat sources. Stored under these conditions, a one-year shelf life can be expected.