DELAYED SETTING EPOXY
Delayed Setting Time Epoxy Adhesive is the perfect product to use when you need more time to work to get your project pieces in place. This product allows you 30 minutes to arrange and rearrange pieces. 2000 psi strength is great for metal, glass, ceramic and plastic. Cures to a light yellow color.
Directions:
1. Surfaces should be clean and dry, free from oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from container following package directions & mix thoroughly, for about 1 minute.
4. Apply to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 30 minutes at room temperature (77F or 25C) with full cure in 24 hours.
Works Best On:
- All-Purpose
- Ceramic
- Fiberglass
- Glass
- Leather
- Metal
- Most Plastics
- Wood
Technical Specifications:
Initial color: Clear hazy to light yellow
Final color: Light yellow
Maximum Gap: .25”
Hardness, Shore D: 75-83 (After full cure)
Set Time: 30 minutes @ 65-80°F
Shear Strength, Steel: 2000 psi (± 20%); Aluminum: 1400 psi (± 20%)
Handling Time: After 7 hours
Full Strength: 24 hours
Operating Temperature Range:-65 – 225°F (-54 – 107°C)