Chrome Nickel Paste - 240gr
Ref 76702
Bardahl Chromium Nickel-Paste is a lubricating - and assembly paste for very high
temperatures up to 1600C! This paste contains metallic powders and synergistic
working additives.
When a screw thread gets as it were seized, because of the heat, the only solution is
using for example a metal saw. The damage parts will then have to be replaced and
this is a time-consuming matter. With Chromium Nickel-Paste you do not get into this
situation!
The problem
When two connecting metal parts are exposed to heat for some length of time, they will
oxidize on the confronting sides. The crystals of the oxide thus formed will spread from
the one side to the interstice of the other side and bite into the surface. When this goes
hand in hand with the vibrations, a 'cold-welding' of both metal surfaces may occur. This
will then result in a complete jamming.
The working
Bardahl Chromium Nickel Paste provides long-lasting protection of slow-moving
machine parts and engine parts. This product creates a different metallic medium
between metal surfaces which do not compound with either of the two metal surfaces. In
this way the metal surfaces of all sorts of joints will be kept apart, even after exposure to
extreme pressures or temperatures. A thin coating will provide trouble-free and long
lasting protection against the seizing, corrosion and rusting of bolts, threaded ends,
nuts, joints, fences, etc. It provides protection against oxidation, corrosion, vibrations,
wear and attack. The balanced composition of this product highly simplifies the fitting on
and detaching of screws, bolts and nuts.
Properties
• Rapidly and easy mounting of wire connections.
• Prevents corrosion
• Gives a quick and easy release of bold/nut connections, even after exposure to
very high temperatures up to 1600°C, corrosive atmospheres or extreme
pressures.
• Reduces wear on places with high friction.
• Will prevent corrosion by acids, salt or caustics.
• Will not be washed away by water.
The use of Bardahl Chromium Nickel-Paste will prevent metal parts welding together
because of extreme pressures and temperatures.
Bardahl Chromium Nickel-Paste also prevents disc brake screeching
Tests
Extensive tests at high temperatures, variable loads and humidity levels, haven proved
the effectiveness of Bardahl Chromium Nickel-Paste.
Application
Below a brief cut line of some uses.
General industrial uses: Lock bolts and pins of all kinds of machine parts such as
pumps, mixing units, hinge points of presses. Lock bolts of excavator, loading cranes,
draglines, etc.
Steel mills: Safety valve bolts and various other parts exposed to high temperatures.
Power Station: High-pressure flanges of boilers. Head bolts of boilers. Head bolts of
lids for turbo generators and turbo-blowers. Turnbuckles and nuts of high-pressure
boilers.
Automobile sector incl. transport: For the fitting, on of all those parts which will have
to be taken down later on, such as bolts on exhaust pipes, gaskets and car door locks.
For the prevention of screeching noises in disc brake systems.
Marine: For fitting on of all those parts which will have to be taken down later on, such
as bolts on exhaust pipes, gaskets and locks etc.
Welding: Protects against welding-spatter when CO2 welding equipment is used. Use
on the screw threads of nozzles, guide bushed and on the fastening points of welding
torches.
Agrarian sector incl. earthmovers: Bearing bolts and fastening screws of caterpillars,
tractors (incl. auxiliary engines), combine harvesters, etc.
Railroads: Pivots, lock bolts of buffers and adjusting screws of diesel locomotive
brakes.
Directions for use
When spraying on Bardahl Chromium Nickel-Paste, the aerosol-can type will provide
a thin, even film on the surface to be treated. Even parts that are hard to get can be
given the required protection by means of a sprayer.
Note:
Bardahl Chromium Nickel-Paste contains no molybdenum disulphide or graphite, no
sulphur or sulphur compounds.
Direction for use on brake discs
To prevent screeching noises in disc brakes, the parts to be treated should be cleaned
first (remove rust) and then Bardahl Chromium Nickel-Paste should be put on or
sprayed on. The entire rear of the brake shoes, the pressure plates, the pressure
pistons and the various springs, rings, plates and bolts should be greased or sprayed
with Bardahl Chromium Nickel-Paste.